Problem:

“I have the knob adjusted to the assist that I want. However sometimes when I turn the car on the assist will be OFF. And what I need to do is turn the knob all the way down, wait, turn the pot back to where I like it, wait, and then it will work again. How do I avoid having to do this every time I start up the car?

Solution:

  1. Put your key in the car, turn to 1st position (ON).
  2. Listen for the ECU to “click” on.
  3. Turn the key to start.
  4. If the unit turns off after start, you have a drop in voltage below 11V at the place you pick up power to the EPS Controller.